Staclean  Silo Bin Vents

Directly from the Manufacturer to You

Additional Sizes: 800-438-3850 or      

Staclean Is Your Single Source Supplier



MVC-632S      MVC-636S


The ultimate low cost, high performance, easy to install Silo Bin Vent with Flip-Top lid.

 Print a Quote

    A size 9-3.2-BDS Staclean™ Silo Bin Vent with Pleated Bags and flip top lid contains 240 square feet of effective cloth area and is designed to handle 1000 CFM at 70˚F temperature with an air-to-cloth ratio of 4.15 to 1 and an upward can velocity of 173 feet per minute.

    Pleated Bags with Diffuser core: The pleated bags have 45 pleats and are 100% spunbond polyester to withstand a maximum operating temperature of 200˚F.  Each pleated bag is 6.25" diameter (tubesheet hole) by 36" long and contains 26.7 square feet of effective cloth area.  They are top removal with snapband for ease of maintenance.   

    Preassembled, Prepiped & Prewired:  The unit ships preassembled.  The solenoids and diaphragm valves are integral and the solenoids are prewired to the timer, mounted below the header.  The clean air plenum, tubesheet and dirty air plenum will all be assembled in one unit.  The unit can be lifted off the truck and set into place.  This will save you at least 10-20 on site man hours.  Just run 110V to the timer and compressed air to the header.

   Price: (1) Model # 9-3.2-BDS, In Stock

   F. O. B. point of manufacture less all applicable sales and excise tax

         Now Just. . . . . . USD . . $ 4,260.00

If shipped by common carrier, they require a custom-built pallet. . . . $175.00

    Options:  Price, additional

$ 237.00

Mating flange, 6” tall

$ 249.00

Bag catch grate

$ 434.00

20" x 20" port door

$ 200.00

Finish coat of enamel, Gray or Silo Tan or Staclean Safety Blue

$ 298.00

Photohelic Controlled  timer  in lieu of Magnehelic & timer, prewired

A fan is available, mounted on top of the unit


Summary of Features for Silo Bin Vent

Model:  Staclean 9-3.2-BDS


CFM:  1000 at 70˚F.

Metal:  housing:  10 ga mild steel

         tubesheet:  10 ga. mild steel

Tubesheet dim (ID):  2.73' x 2.73'

Distance between holes:  3.75" x 3.75"

Approximate dead load:  520 lbs.

Options weight:  145 lb

Fan weight:  190 lb

No. filter elements:  (9) 36” pleated bags 

Sq ft filter media:  240

Air to cloth ratio:  4.15

Can velocity:  173 fpm 

Bag access:  top removal

Clean air plenum access:  Flip-Top-Lid


Pleated bags:  spunbond polyester, 45 pleats, snapband top, 36" long

Instrumentation:  magnehelic

Timer:  solid state

Diaphragm valves and blow pipes:  1 inch diameter

Compressed air:  less than 4.8 cu. ft at 90 - 100 psi




    integral diaphragm valves and solenoids

    solenoids prewired to the timer, with Matrix wiring system

    tubesheet with perimeter welding

    flanged bottom &  if fan option is taken flanged outlet


    lifting lugs

    pleated bags are installed

    Extra wide bag spacing to help reduce can velocity


Paint:  Interior:  none

          Exterior:  SP 2, one coat of primer


Drawings:  waived

Shipment:  IN STOCK units or 1 to 3 weeks

Freight:  FOB shipping point


Recommended spare parts stock:

         10% pleated bags

          5% valves

         10% valve kits


Staclean Is Your Single Source Supplier

For All Your Baghouse Needs

Fast Response, Budget Estimates, Firm Quotes,

Additional Information: 800-438-3850 or

Easy to install Silo Bin Vent with Flip-Top lid



eXTReMe Tracker